|
gibsonguru15 (November 30, 1999 at 12:00 am)
would u recommend following the same steps for a poppet valve with an lpr? such as ego etek fusion...
mark93shark (November 30, 1999 at 12:00 am)
how does the high pressure regulator come into play and how would you go about tuning it?
armyqpzm (November 30, 1999 at 12:00 am)
proto pm8 or dye dm5
redneckrambo95 (November 30, 1999 at 12:00 am)
just got my dm8 is there any possible way to mess it up by tuning it?i dont want to break it
paintmaster22 (November 30, 1999 at 12:00 am)
this vid helped me out alot.!!! i just bought my first dm
alexmoyal (November 30, 1999 at 12:00 am)
is it bad if my bolt doesnt go forward when i turn the lpr all the way in?when i pull the trigger with the lpr all the way in it starts leaking
TheTheshooter07 (November 30, 1999 at 12:00 am)
somthing is wrong if ur 5 turns out on a dm9, why mask the real problems, turning up the pressure may get it shooting but not the best, make sure u didnt crank in the lpr to far and crack or tear the external o ring on the adjuster, make sure its thinly lubed w a slick lube, and also very important to make sure you select the best o rings for you bolt buy a rebuild kit and select the smoothest o ring that still seals, these are a few of the tricks i use and my dm runs great
RapidPhame (November 30, 1999 at 12:00 am)
I have a DM4, when tuning the LPR and getting the correct velocity, CAN i increase the pressure by turning the LPR bolt while i have a tank on and air active? i dont feel like messing the gun up
anton8901 (November 30, 1999 at 12:00 am)
Mike, what about the dwell settings? I heard for DM9/10 the dwell should be at 18 when you do the lpr tuning. Should the dwell be the same for all the other DM series?
mitchio83 (November 30, 1999 at 12:00 am)
Mike could you please do a "how to" on the Jackhammer 2 LPR? How different is it than the DM LPR? |
